Features
Switchback Functionality: Red Run/Brake & Amber Turn Signal
Run/Brake Circuit: 25% Run, 100% Brake 
180-degree viewing angle
Six high power LEDs (per pod)
Low-profile design 
Easy connection to vehicle brake and turn circuit
E-Mark approved run, brake and turn signal
 
Specs
Total Power Draw: 0.06A Run, 0.25A Brake, 0.55A Turn Signal 
Input Voltage: 12V DC
Size: 2.9" x 1.13" x 0.5"
Wire Length: 30"
Weight: 0.08 lbs
Raw Lumens: 870
Waterproof: IP67
 
What’s In The Box?
(2x) Rear Signal Pods 
(2x) Wiring pigtails with waterproof connectors
(4x) Mounting screws
(8x) Posi-Taps
Illustrated installation instructions
 
PLEASE NOTE: DENALI T3 Rear Pods are only compatible with BMW R1250GS/A or R1300GS/A bikes when used with the CAN Bus system. Please note that when powering rear T3s through a CANsmart the red running light will remain illuminated between the amber turn signal flashing. This is an unavoidable result when powering T3s solely from a CANsmart. If you'd prefer that the running light shuts off when the amber signal is active, simply connect the red running light wires from the T3 pods directly to a switched power source on your vehicle (and set the CANsmart brake light circuit to brake only).